Our Products
Iron, steel and building materials across nine product groups. If you can’t find what you need, ask us — we will share stock and supply details right away.
01Steel Profiles
Box, galvanized and oval steel profiles in a range of sizes for construction, metalwork and fabrication.
Box Profile (SHS / RHS)
Welded square and rectangular hollow sections for construction, metalwork and fabrication, supplied from stock in a range of sizes and wall thicknesses.
View Details
Galvanized Profile
Square and rectangular profiles made from zinc-coated steel, suited to greenhouses, fencing and other outdoor work that needs extra corrosion protection.
View Details
Oval (Elliptical) Profile
Steel profiles with a rounded, elliptical cross-section that give railings, furniture and decorative metalwork a clean look and a comfortable grip.
View Details02Steel Pipes
Black, galvanized and large-diameter structural steel pipes for building services and load-bearing work.
Black Steel Pipe
Uncoated welded steel pipes for construction, railings, building services and general fabrication, in a range of diameters and wall thicknesses.
View Details
Galvanized Steel Pipe
Hot-dip galvanized steel pipes, threaded and supplied with sockets, offering corrosion resistance for water and irrigation lines and outdoor use.
View Details
Large-Diameter Structural Pipe
Large-diameter structural steel pipes for columns, posts and load-bearing frames where high load capacity and buckling resistance are needed.
View Details03Structural Steel
UPN channels, IPN beams, angles, flats, rounds and squares for steel structures and fabrication.
UPN Steel Channel
Hot-rolled U-section steel channel with tapered inner flanges, used for beams, purlins, frames and chassis members in steel structures.
View DetailsIPN Steel Beam
Hot-rolled I-section steel beam with tapered inner flanges, used for members that carry bending loads, such as mezzanine, floor and runway beams.
View Details
Equal Angle Bar
Hot-rolled equal-leg L-section steel angle, one of the most widely used sections in steel structures, frames, shelving and metalwork.
View Details
Flat Bar
Hot-rolled steel bar with a flat, rectangular section, used for connection plates, railings, ornamental ironwork and general fabrication.
View Details
Round & Square Bar
Hot-rolled solid round and square steel bars for ornamental ironwork, railings, anchors and machine parts.
View Details04Steel Sheets & Coils
Black, galvanized and checker plate sheets, plus steel coils, for fabrication, cladding and flooring.
Black Steel Sheet (CR / HR)
Uncoated cold-rolled (CR) and hot-rolled pickled (HRP) steel sheets in common sheet sizes for general fabrication, machinery and enclosure work.
View Details
Galvanized Steel Sheet
Hot-dip zinc-coated steel sheets for ventilation ducts, roof and façade details, and fabrication for humid environments.
View Details
Checker Plate
Steel plate with a raised diamond pattern that reduces slipping, used for stair treads, platforms, ramps and vehicle floors.
View Details
Steel Coil
Black, galvanized and pre-painted steel coils, supplied in coil form for roll forming, roofing components, folded parts and volume sheet-metal work.
View Details05Roofing
Trapezoidal and tile-effect roofing sheets, ridge caps and timber battens for complete roofs.
Trapezoidal Roofing Sheet
Galvanized and pre-painted trapezoidal sheets for roofs and walls: a lightweight cladding that installs quickly on warehouses, canopies, farm buildings and homes.
View Details
Tile-Effect Roofing Sheet
Pre-painted steel roofing that gives the look of a tiled roof at a fraction of the weight, popular for houses, villas, outbuildings and re-roofing.
View Details
Ridge Caps & Roof Accessories
Ridge caps and finishing accessories that close the ridge line on trapezoidal and tile-effect steel roofs, in colours such as white and anthracite.
View Details
Roof Battens & Timber
Timber battens and sawn timber used as supporting and fixing members beneath roof coverings on tiled, steel and shingle roofs.
View Details06Building Boards
OSB, film-faced plywood, plasterboard, exterior and cement-bonded boards for formwork, roofing and drywall.
OSB Board
Oriented strand board for roof sheathing, subfloors and wall panels. Supplied wholesale and retail from our warehouse in Kemer.
View Details
Film-Faced Plywood
Plywood faced on both sides with phenolic film for concrete formwork. It gives a smooth concrete finish, strikes cleanly and can be reused over several pours.
View Details
Gypsum Plasterboard
Gypsum board for suspended ceilings, partitions and wall linings, in standard (white), moisture-resistant (green) and fire-resistant (pink) types.
View Details
Boardex & Exterior Boards
Moisture-resistant sheathing boards used behind facade finishes on light-gauge steel and timber-framed exterior walls.
View Details
Cement-Bonded Particle Board
Building board made from wood particles bonded with cement, resistant to moisture, fire and rot. Used for floors, walls and facades, indoors and out.
View Details07Insulation & Waterproofing
Bituminous waterproofing membranes, XPS and stone wool boards for roofs, foundations and facades.
Bituminous Waterproofing Membrane
Polymer-modified bitumen sheet for waterproofing foundations, basement walls, terraces and roofs, with polyester or glass-fleece carriers and plain or mineral-surfaced finishes.
View Details
Thermal Insulation Boards (XPS & Stone Wool)
XPS and stone wool boards for floor, roof and wall insulation. XPS stands out for moisture and compression resistance, stone wool for non-combustibility and sound insulation.
View Details08Wire Mesh & Fencing
Panel fencing, welded mesh, expanded metal and chain-link for perimeters, gardens, sites and concrete work.
Welded Panel Fence
Galvanized welded wire fence panels with powder coating and V-shaped stiffening folds. They give a neat, durable boundary for land, gardens, facilities and construction sites.
View Details
Welded Wire Mesh
Steel wire mesh welded at every intersection and supplied in sheets. Used as concrete reinforcement and, in galvanized form, for fencing, cages and guard panels.
View Details
Expanded Metal & Chain-Link Fence
Expanded metal, slit and stretched into a diamond mesh, and woven chain-link wire. Used for fencing, guarding, plaster lath and ventilation openings.
View Details09Hardware & Consumables
Cutting discs, wrought iron parts, hinges, threaded rod, paint and thinners for workshops and sites.
Cutting & Grinding Discs
Cutting, grinding and flap discs for steel and stainless steel, in diameters for both small and large angle grinders.
View Details
Wrought Iron Accessories
Ready-made ornamental parts for gates, railings, window grilles and fences: collars, leaves, spear tips, rosettes and scrolls.
View Details
Hinges & Fasteners
Weld-on barrel hinges for steel doors and gates, plus fasteners such as bolts, anchors, hooks and gate wheels.
View Details
Threaded Rod
Fully threaded, galvanized steel rod in common sizes from M8 to M22, used for anchoring, suspension and fixing.
View Details
Paints, Primers & Thinners
Synthetic paints, anti-rust primers, spray paints and cellulose thinner for protecting and finishing steel and metalwork.
View Details
Turbine Roof Ventilator
A wind-driven turbine that draws hot, humid air out of roof spaces and flues without using electricity.
View DetailsNo products match your search. Reach us on WhatsApp or by phone and we will check our stock for you.
Get a fast quote for your project
Tell us the product, size and quantity you need — we will get back to you with availability and pricing as soon as possible.